Ceramic background wall automatic sand blasting machine
Ceramic background wall automatic sand blasting machine characteristics
1. The belt is conveyed by the V-belt. The conveying speed can be controlled by frequency conversion digital, the sandblasting speed is fast, the processing quality is stable, and the operation is simple and safe.
2. The workpiece is placed on the conveyor belt during operation, and the sandblasting operation is automatically completed, which is very simple and convenient.
3. The swinging arc of the spray gun can be adjusted.
4, spray gun and spray gun rack, can be placed according to the size of the workpiece, and can do 720 degrees of rotation, so that various workpieces can be evenly processed by sandblasting.
5, equipped with a large upper cyclone separator, can automatically continue to use the abrasive and useless dust, so the abrasive can be recycled
Thereby greatly reducing the abrasive consumption and saving costs.
6. This machine is equipped with 8 sets of spray guns. Each spray gun has separate control and is equipped with a blown sand suction gun to reduce the sand material attached to the workpiece after processing.
7. The main components are made of high quality imported parts, with less wearing parts and long service life.
Principle of sand blasting machine
The blasting machine is powered by compressed air to form a high-speed jet beam to spray the spray at a high speed onto the surface of the workpiece to be treated, so that the surface of the workpiece is outside.
A machine in which the mechanical properties of the surface change. Due to the impact of the abrasive on the surface of the workpiece and the cutting action, the surface of the workpiece is cleaned
Degree and different roughness, the mechanical properties of the workpiece surface are improved, thus improving the fatigue resistance of the workpiece and increasing the attachment between it and the coating.
Focusing on, prolonging the durability of the coating film, and also facilitating the leveling and decoration of the coating, removing impurities, mottling and oxide layers on the surface, and simultaneously making the medium
The surface is roughened to cause residual stress on the surface of the substrate and to increase the surface hardness of the substrate.
Sandblasting process advantages:
1. The metal parts of the blasting equipment are basically not damaged, and the dimensional accuracy will not change;
2 The surface of the part is not contaminated, and the abrasive does not chemically react with the material of the part;
3 sand blasting equipment can easily handle difficult parts such as grooves, and abrasives of various sizes can be used.
4 The processing cost is greatly reduced, which is mainly reflected in the improvement of the working efficiency of the blasting equipment and can meet various surface finishing requirements;
5. Low energy consumption and low cost;
6 sandblasting equipment does not pollute the environment, eliminating the need for environmental management.